background image

Electro-Voice

®

 

 Sx600 User Manual

12

the microphone and use a good compressor/limiter to

compensate for variances in microphone distance and

excitement.

Appendix B: Warranty Statement

Electro-Voice® products are guaranteed against malfunction due to defects

in materials or workmanship for a specified period, as noted in the individual

product-line statement(s) below, or in the individual product data sheet or

owner’s  manual,  beginning  with  the  date  of  original  purchase.  If  such

malfunction occurs during the specified period, the product will be repaired

or replaced (at our discretion) without charge. The product will be returned

to the customer prepaid.

Exclusions and Limitations

The Limited Warranty does not apply to: (a) exterior finish or appearance;

(b) certain specific items described in the individual product-line statements

below, or in the individual product sheet or owner’s manual; (c) malfunction

resulting from use or operation of the product other than as specified in the

product data sheet or owner’s manual; (d) malfunction resulting from misuse

or abuse of the product; or (e) malfunction occurring at any time after repairs

have been made to the product by anyone other than Electro-Voice® Service

or any of its authorized representatives.

Obtaining Warranty Service

To obtain warranty service, a customer must deliver the product, prepaid,

to Electro-Voice® Service or to any of its authorized service representatives,

together with proof of purchase of the product in the form of a bill of sale or

receipted invoice. A list of authorized service representatives is available

from Electro-Voice® Service at: 12000 Portland Avenue, Burnsville, MN

55337. Ph: (877) 863-4166.

Incidental and Consequential Damages Excluded

Product repair or replacement and return to the customer are the only

remedies provided to the customer. Electro-Voice® shall not be liable for

any incidental or consequential damages including, without limitation, injury

to persons or property or loss of use. Some states do not allow the exclusion

or limitation of incidental or consequential damages, so the above limitation

or exclusion may not apply to you.

Other Rights

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state.

Speakers and Electronics

Electro-Voice® Speakers and Speaker Systems are guaranteed against

malfunction due to defects in materials or workmanship for a period of five

(5) years from the date of original purchase. The Limited Warranty does

Summary of Contents for SX Series SX600

















Reviews: