PXM-12MP Powered Monitor
Floor monitor, tripod, and pole mount operation | en
11
Electro-Voice
Installation manual
2019-10 | v01 | F.01U.363.983
3
Floor monitor, tripod, and pole mount operation
3.1
Floor monitor
The PXM-12MP monitor is optimized for floor placement.
To setup the device as a monitor, do the steps that follow:
1.
Make sure the surface is stable, level, and clear of debris.
2.
Place the PXM-12MP on the surface.
3.
Position the speaker at a distance relative to your position so that your head is on axis
with the speaker.
4.
Feed the necessary cables through the cable routing hole to neatly and safely manage
cable clutter.
5.
Power on the system and configure as outlined in the Quick setup section.
6.
Make sure that the DSP MODE is set to MONITOR 1, MONITOR 2, or GUITARCAB.
Summary of Contents for PXM-12MP Series
Page 1: ...PXM 12MP Powered Monitor PXM 12MP EU PXM 12MP US en Installation manual...
Page 2: ......
Page 31: ......
