background image

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497  Fax: 800/955-6831

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0   Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051   Fax: + 1 952 736-4212

For warranty repair or service information, contact the Service Repair department at:

800/392-3497

For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.

12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043

www.electrovoice.com

© Telex Communications, Inc. 2/2006
Part Number 38110-226 Rev. B

Architectural & Engineering Specs:

Frequency Response:

Polars:

PolarChoice™ Series PC-12/FL, PC-18/FL

The microphone shall be a back-electret condenser type with a frequency response of 50 Hz to 20 kHz. The
microphone shall have a nominal, balanced output impedance of 200 ohms. The microphone shall have four selectable
polar patterns: omnidirectional, cardioid, supercardioid, and hypercardioid. The microphone shall have an output level of
5.6 mV/Pascal, and outputs shall not be appreciably affected by the following temperature and humidity extremes: -29°
to 74° C (-20° to 165°F) when the relative humidity is 0-50%; -29° to 57°C (-20° to 135°F) when the relative humidity is
0-95%. Dimensions shall be 350.7 mm (13.8 in.) long (PC-12/FL), and 495.1 mm 19.5 in.) long, (PC-18/FL) with a
maximum head diameter of 14.6 mm (0.58 in). The PC-12/FL microphone shall include a 313.2 mm (12.3 in.)
gooseneck. The PC-18/FL microphone shall include a 457.7 mm (18.0 in.) gooseneck. The PC-12/FL and PC-18/FL
goosenecks microphones will include an external electronics module, which is terminated with a professional XLR-type
3-pin style connector. The electronics module will have a switchable high pass filter to roll off low frequencies. The
microphone shall be of metal construction. The microphone will include an external windscreen. The microphone shall
have a nonreflecting black finish. The Electro-Voice PolarChoice™ series PC-12/FL or PC-18/FL is specified.

 

 

 

 

 

Summary of Contents for PC-12/FL

Page 1: ...herefore changes in equalizer settings are unnecessary The PC 12 FL and PC 18 FL are acoustically designed for high quality sound reinforcement and broadcast applications The frequency response is tailored for wide range sound reproduction with very natural sound pick up for either distant or close up use The PC 12 FL and PC 18 FL microphones can be mounted in several different ways They can be mo...

Page 2: ... Voltage 1 kHz 5 6mV Pascal Clipping Level 1 THD 135 dB SPL Equivalent Noise 26 dB SPL A weighted 0 dB 20 micropascals Dynamic Range 109 dB Output Impedance 1 kHz 200 ohms Power Requirements Phantom 12 52 VDC Current Consumption 8 mA with P12 supply Polarity Pin 2 positive referenced to pin 3 with positive pressure on the diaphragm Dimensions Gooseneck Length PC 12 FL 313 2 mm 12 3 in PC 18 FL 457...

Page 3: ...e adaptor 4 Insert the microphone and shock mount into the hard plastic flange using a twisting action to seat the shock mount 1 Disconnect the cable from the electronics module 2 Unscrew the hex retainer from the bottom of the gooseneck 3 Thread the cable through the knurled ring and hex retainer 4 Screw the hex retainer back on the bottom of the goose neck and tighten securely 5 Reconnect the ca...

Page 4: ...impedance of 200 ohms The microphone shall have four selectable polar patterns omnidirectional cardioid supercardioid and hypercardioid The microphone shall have an output level of 5 6 mV Pascal and outputs shall not be appreciably affected by the following temperature and humidity extremes 29 to 74 C 20 to 165 F when the relative humidity is 0 50 29 to 57 C 20 to 135 F when the relative humidity ...

Reviews: