26
en | Amplifier DSP
EVOLVE Portable Column Loudspeaker
2021-04 | v04 | F.01U.393.750
User manual
Electro-Voice
FX1 & FX2 Menu (Mixer mode)
The
FX1 & FX2 menu
is used to select the reverb, delay, chorus, or flanger preset for each FX
unit.
AUX OUT Menu (Mixer mode)
The
AUX OUT menu
is used to select the signal present at the AUX OUT connector:
–
AUX
MIX
(default) - provides the signal mix controlled by the individual channel AUX
sends
–
MAIN MIX
- provides the same signal that is present at the loudspeaker
MIX OUT Menu (Mixer mode)
The
MIX OUT
menu
is used to select which signals should be output at MIX OUT and which
signal should be delivered by the loudspeaker.
–
L+R: INPUTS 1-4 and the left and right signals of INPUT 5/6 & 7/8 are summed. The sum is
output at MIX OUT and is delivered by the loudspeaker. (Default)
–
R: Only the right signal of INPUT 5/6 & 7/8 and the percentage of INPUTS 1-4 panned
right is output at MIX OUT. The loudspeaker will deliver only the left signal.
–
L: Only the left signal of INPUT 5/6 & 7/8 and the percentage of INPUTS 1-4 panned left is
output at MIX OUT. The loudspeaker will deliver only the right signal.
BLUETOOTH Menu
Turning Bluetooth® ON or OFF
To
turn Bluetooth® ON or OFF
, do the following:
1.
Select
ON
.
OR
Select
OFF
.
The
Bluetooth
menu
options are ON/OFF, CONTROL PAIR, and AUDIO PAIR.
CONTROL PAIR Menu
The
CONTROL PAIR menu
is used to enable the Quick
Smart
Mobile wireless control and
monitoring application. Available options for this selection are: ON or OFF.
The default is OFF.
i
Notice!
Bluetooth® is available in select countries.
Contact your nearest Electro-Voice dealer or Electro-Voice distributor for more information.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Bosch Security Systems, Inc. is under license. Other trademarks
and trade names are those of their respective owners.
AUDIO PAIR Menu
The
AUDIO PAIR menu
is used to stream audio from your Bluetooth® enabled device to the
loudspeaker system. Available options for this selection are: PAIRING, ON or OFF.
The default is OFF.
Pairing the portable column system with your Bluetooth® enabled device
To
pair the portable column system with your Bluetooth® enabled device
, do the following:
1.
From the DSP menu, scroll to
AUDIO PAIR
.
2.
Select
AUDIO PAIR
.
AUDIO PAIR
mode enables 120 seconds of visibility to Bluetooth® enabled devices.
3.
On your mobile device, select
EV EVOLVE
to initiate the pairing process.
Once the device is paired, all device audio will be output through the EVOLVE system.
