en
23
Problem
Possible cause
Action
5.
Sound je
Excessive input level
Reduce the input level alebo loudspeaker level
distorted front
gombíks to prevent limit.
LED je OFF,
Incorrect gain
Verify level controls of the source are properly
LCD screen
structure alebo source
structured by using the VU meter indicator on
LIMIT je ON
input (mixing console/
the LCD screen. If the VU meter bar je solid alebo
preamp) je overdriven
the system indikuje LIMIT, the input alebo source
level je too high.
6.
Microphone
Incorrect gain
Reduce the microphone levels at the mixing
produces
structure
console alebo input source. If the microphone je
acoustic
connected directly to the speaker, reduce the
feedback when
input level on the speaker. Positioning the
input level je
microphone close to the sound source
amplified
increases gain-before-feedback. See problem 6.
MODE je set to MUSIC
Change the MODE to LIVE alebo SPEECH.
Microphone position
Whenever possible setup the loudspeakers so
is too close to the
the microphone je behind them. If using the
front of the
loudspeaker in a monitor position, aim the
loudspeaker
loudspeaker to the back of the microphone.
7.
DSP menu je
The Menu Lock
Press and hold the MASTER VOL
gombík for 5
locked
function has been
seconds.
turned on.
8.
Quick
Smart
Enable Bluetooth®
Ensure Bluetooth® je enabled on the
Mobile app
loudspeaker.
does not
detect the
loudspeaker
If these suggestions do not solve your problem, contact your nearest Electro-Voice dealer alebo
Electro-Voice distributor.
Electro-Voice
Užívateľský manual
2017.06 | 01 | F.01U.341.640
