background image

Introduction

The EVID-S series from Electro-Voice is a line of compact, high-performance, two-way, full-
range surface mount loudspeakers with excellent wide and uniform coverage, and outstanding
performance. Their design makes these practically invisible for use in background and
foreground music, paging, and sound reinforcement applications, making EVID-S ideal for
indoor and outdoor applications, such as restaurants, bars, patios, retail, fitness clubs,
hospitality, theme parks, leisure venues, and others. With unparalleled ease-of-installation,
sturdy weather resistance, modern and delicate look, and flexible mounting options, the EVID-
S series is the perfect solution for a wide variety of surface mount applications.
 
All EVID-S series full-range loudspeakers (except for the EVID-S5.2X) include a unique and
innovative mount system from Electro-Voice, prepared to make any job easier. This mount
system allows for 90 degrees of rotation horizontally and 45 degrees of rotation vertically. It
comes already assembled and is easily installed on walls and ceilings. Its unique and
innovative mount system makes every installation quick, simple, and reliable.
 
Read through this manual to familiarize yourself with the safety information, features, and
applications before you use these products.

System features

EVID-S4.2/EVID-S4.2T

Innovative mount system is included for quick, simple, and reliable installations

Carefully engineered for outdoor environments (IP54), without compromising
performance

Long throw 4" (102 mm) woofer housed in a fire rated ABS plastic enclosure for extended
LF performance down to 75 Hz

40 W power handling provides for 103 dB maximum SPL (109 dB peak)

70/100 V transformer version (EVID 4.2T) available for constant voltage systems

 
EVID-S5.2/EVID-S5.2T

Innovative mount system is included for quick, simple, and reliable installations

Carefully engineered for outdoor environments (IP54), without compromising
performance

Long throw 5.25" (133 mm) woofer housed in a fire rated ABS plastic enclosure for
extended LF performance down to 60 Hz

75 W power handling provides for 109 dB maximum SPL (115 dB peak)

70/100 V transformer version (EVID 5.2T) available for constant voltage systems

 
EVID-S8.2/EVID-S8.2T

Innovative mount system is included for quick, simple, and reliable installations

Carefully engineered for outdoor environments (IP54), without compromising
performance

Long throw 8" (203 mm) woofer housed in a fire rated ABS plastic enclosure for extended
LF performance down to 50 Hz

90 W power handling provides for 110 dB maximum SPL (116 dB peak)

70/100 V transformer version (EVID 8.2T) available for constant voltage systems

3

3.1

EVID-S Surface Mount Loudspeakers

  

2017.08 | 01 | F.01U.345.360

Installation manual

Electro-Voice

Summary of Contents for EVID-S

































Reviews: