Architects’ & Engineers’ Specifications:
Frequency Response:
Block Diagram:
Beamwidth:
Directivity:
Performance Match:
•
EVID C10.1 Subwoofer
•
CPS-1 Power Amplifier
•
CPS-2 Power Amplifier
•
CPS-2T Power Amplifier
•
MA-1206 Mixer Amplifier
•
MA-1212 Mixer Amplifier
EVID C8.2 Part Number
•
301318-000
12000 Portland Avenue South, Burnsville, MN 55337
Phone:952/884-4051, Fax:952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 9/2002
Part Number 38110-169 Rev A
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at:
866/78AUDIO
Specifications subject to change without notice.
Dimension Drawings:
The EVID C8.2LP loudspeaker system shall be comprised of a UL
94V-0 fire rated ABS baffle/bezel assembly, zinc plated steel rear
enclosure, powder coated grille with safety tether, transformer with 8
ohm bypass, and 8-inch polypropylene low frequency transducer with
coaxially-mounted waveguide coupled 1 inch titanium coated dome
tweeter. The loudspeaker shall meet the following criteria: power
rating shall be 100 watts of EIA RS-426A pink noise (6 dB crest
factor). Frequency response, uniform from 50 Hz to 20 kHz. Pressure
sensitivity, 91dB SPL at 1 meter (3.3 feet) on axis with one watt of
pink noise (ref. 20µPa). Minimum impedance, 6.0 ohms. The
loudspeaker shall be 178 mm (7.0 in.) deep and 270 mm (10.6 in.) in
diameter. Weight shall be 5.0 kg. (11.0 lb) The coaxial ceiling
loudspeaker shall be the Electro-Voice ® model EVID C8.2LP.
