Architects’ & Engineers’ Specifications:
Frequency Response:
Dimension Drawings:
Block Diagram:
Performance Match:
•
CPS-1 Power Amplifier
•
CPS-2 Power Amplifier
•
CPS-2T Power Amplifier
•
MA-1206 Mixer Amplifier
•
MA-1212 Mixer Amplifier
EVID C10.1 Part Number
•
301263-000
12000 Portland Avenue South, Burnsville, MN 55337
Phone:952/884-4051, Fax:952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 8/2002
Part Number 38110-128 Rev B
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at:
866/78AUDIO
Specifications subject to change without notice.
The EVID C10.1 loudspeaker system shall be comprised of a UL
94V-0 fire rated ABS baffle/bezel assembly, zinc plated steel rear
enclosure, powder coated grille with safety tether, transformer
with 8 ohm bypass and 10-inch polypropylene low frequency
transducer. The loudspeaker shall meet the following criteria:
power rating shall be 100 watts of EIA RS-426A continuous pink
noise (6 dB crest factor). Frequency response, 45 Hz to 180 Hz.
Pressure sensitivity, 94 dB SPL at 1meter (3.3 feet) on axis with
one watt of pink noise (ref. 20µPa). Minimum impedance, 6.0
ohms. The loudspeaker shall be 320 mm (12.6 in.) in diameter
and 303 mm (11.9 in.) deep. Weight shall be 7.0 kg. (15.5 lb). The
subwoofer ceiling loudspeaker shall be the Electro-Voice ® model
EVID C10.1.
