Electro-Voice EVA Series User Manual
27
5.0 EVA Rigging System (cont’)
5.25 EVA-1151D Tie Plates
The tie plates included with each EVA-1151D module facilitate the assembly of multiple EVA-1151D
modules in a vertical column at either zero or 5 degrees of splay between modules. They also provide the
attachment points for suspending EVA-2082S modules underneath. Another feature is the ability to invert
these tie plates and install at the top of an EVA-1151D module with an optional EVA-GXB spreader bar to
serve as a rudimentary flying grid for a stand-alone subwoofer hang if only minimal down angle is required.
See Figure 20. Note that EVA-1151D tie plates may be used as a suspension grid ONLy in conjunction
with an EVA-GXB spreader bar (sold separately).
Figure 20:
EVA-1151D tie plate configurations (left side shown, right side mirrored)
Attach Lower
EVA-1151 using
These Holes
Attach upper
EVA-1151 using
These Holes
Attach to Top of
upper EVA-1151
using These
Holes
Attach
EVA-2082 using
These Holes
Attach
EVA-1151 using
These Holes
Attach to Top of
EVA-1151 using
These Holes
Attach EVA-GXB Spreader Bar using These Holes
EVA-1151 to EVA-1151 Array,
0° Splay Between Enclosures
EVA-1151 to EVA-1151 Array,
5° Splay Between Enclosures
EVA-1151 to EVA-2082 Array,
0° Splay Between Enclosures
