background image

ELECTRO-VOICE

®

  

Owner’s Manual

ELECTRO-VOICE

®

 UNIFORM LIMITED WARRANTY

Electro-Voice

® 

products are guaranteed against malfunction due to defects in materials or workmanship

for a specified period, as noted in the individual product-line statement(s) below, or in the individual
product data sheet or owner’s manual, beginning with the date of original purchase. If such malfunction
occurs during the specified period, the product will be repaired or replaced (at our option) without
charge. The product will be returned to the customer prepaid. 

Exclusions and Limitations

: The

Limited Warranty does not apply to: (a) exterior finish or appearance; (b) certain specifics described
in the individual product-line statement(s) below, or in the individual product data sheet or owner’s
manual; (c) malfunction resulting from use or operation of the product other than as specified in the
product data sheet or owner’s manual; (d) malfunction resulting from misuse or abuse of the product;
or (e) malfunction occurring at any time after repairs have been made to the product by anyone other
than Electro-Voice or any of its authorized service representatives. 

Obtaining Warranty Service

: To

obtain warranty service, the customer must deliver the product, prepaid, to Electro-Voice or any of its
authorized service representatives together with proof of purchase of the product in the form of a bill
of sale or receipted invoice. A list of authorized service representatives is available from Electro-
Voice

® 

at 600 Cecil Street, Buchanan, MI 49107 (616/695-6831 or 800/234-6831). 

Incidental and

Consequential Damages Excluded

: Product repair or replacement and return to the customer are

the only remedies provided to the customer. Electro-Voice

® 

shall not be liable for any incidental or

consequential damages including, without limitation, injury to persons or property or loss of use.
Some states do not allow the exclusion or limitation of incidental or consequential damages so the
above limitation or exclusion may not apply to you. 

Other Rights

: This warranty gives you specific

legal rights and you may also have other rights, which vary from state to state.

Electro-Voice

® 

Speakers and Speaker Systems

 are guaranteed against malfunction due to

defects in materials or workmanship for a period of five (5) years from the date of original
purchase. The Limited Warranty does not apply to burned voice coils or malfunctions such as cone
and/or coil damage resulting from improperly designed enclosures. Additional details are included

in the Uniform Limited Warranty statement.

Service and repair addresses for this product:

Telex Communications, 1 Telex Drive, Morrilton, Arkansas 56013 (501-354-0111)

World Headquarters:

Electro-Voice

®

, 12000 Portland Avenue South, Burnsville, Minnesota 55337 (952-884-4051)

13

ELECTRO-VOICE

®

  

Owner’s Manual

Summary of Contents for Compact Powered Sound Reinforcement Speaker SxA250

















Reviews: