manualshive.com logo in svg

Electro Industries/GaugeTech Shark 100T, Installation & Operation Manual, Page: 296 / 322

Share
Download
Electro Industries/GaugeTech Shark 100T Installation & Operation Manual Download Page 296

     

Doc

#    

E154713     

                              

             D-16

                                                          D: Using SNMP

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

NOTES: 

• The default for both community names is: public. 

• The Agent community name should be the same as the SNMP Network 

Agent device’s Read and Write community name - see D.6.2: Set up 
SNMP Network, on page D-16.

d. Click OK to save your settings.

D.6.2: Set up SNMP Network

Use an SNMP manager application to make the settings that will let the meter work 
within the SNMP network. The example in this manual uses a free SNMP manager 
called SnmpB, but you can perform the same steps with whatever SNMP manager you 
currently use.

You need to have the following MIBs:

•  EtherLike-MIB – RFC 3635

•  IP-FORWARD-MIB – RFC 4292

•  IANA-RTPROTO-MIB – RFC 2932

•  INET-ADDRESS-MIB - RFC 4001

•  IP-MIB – RFC 4293

•  EIG-MIB

•  SNMPv2-SMI – RFC 2578

•  TCP-MIB – RFC 4022

•  UDP-MIB – RFC 4113

1. Open the SNMP manager application (SnmpB in this example). 

2. Click Options in the Tool Bar.

Summary of Contents for Shark 100T



































































































































































































































































































































Reviews:

No comments