manualshive.com logo in svg

Electro Industries/GaugeTech Shark 100T, Installation & Operation Manual, Page: 243 / 322

Share
Download
Electro Industries/GaugeTech Shark 100T Installation & Operation Manual Download Page 243

     

Doc

#    

E154713     

                              

             C-5

C: Using the IEC61850 Protocol Ethernet Network Server

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

C.1.1.2: Publisher/Subscriber Communication (GOOSE)

There is an additional, essential relationship in IEC 61850, known as publisher and 
subscriber, which is the method used in GOOSE messaging. The publisher/subscriber 
relationship differs from the client/server in that there is no explicit one-to-one rela-
tionship between the information producer and consumer. Publishers issue data with-
out knowledge of which devices will consume the data, and whether the data has 
been received. Subscribers use internal means to access the published data. From the 
viewpoint of IEC 61850, the publisher/subscriber mechanism uses the Ethernet multi-
cast mechanism (i.e., multicast MAC addresses at layer 2). The communication layer 
of the system is responsible for transmitting this information to all interested sub-
scribers and the subscribers are responsible for accepting these multicast packets 
from the Ethernet layer. 

The publish/subscribe mechanism is used both for GOOSE and Sampled Value 
services. GOOSE is fully supported by the Nexus® 1500+ meter’s IEC 61850 Protocol 
Ethernet Network server. In addition, the Nexus® 1500+ meter adds a unique, 
powerful implementation to GOOSE, by using it to send alarm/limit messages that 
trigger waveforms whenever there is a power quality event. In this way, if there is a 
power anomaly, there will be multiple captures of the event so that a detailed analysis 
can be performed. See Section C.1.4.2: GOOSE on page C-15, for information on the 
Nexus® 1500+ meter’s GOOSE implementation.

Summary of Contents for Shark 100T



































































































































































































































































































































Reviews:

No comments