3.
Use your flathead screwdriver to turn the ADJUST trim pot while viewing the
reading on your multimeter. For 6L6/5881 style tubes, set the adjustment
between 58-64mV
. From the factory the power tubes were biased to around
the middle setting of 62mV.
WARNING:
Setting the bias higher than 70mV may
destroy your tubes and your amp and will void your warranty.
4.
Allow the amp to warm up for at least 5-10 minutes and readjust the bias to the
desired setting.
5.
Plug an instrument in and play through the MIG-50. Adjust the bias to taste, if
necessary.
WARRANTY INFORMATION
Please register online at http://www.ehx.com/product-registration or complete and
return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will
repair or replace, at its discretion, a product that fails to operate due to defects in
materials or workmanship for a period of one year from date of purchase. This
applies only to original purchasers who have bought their product from an authorized
Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the
unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period, please
contact the appropriate office listed below. Customers outside the regions listed
below, please contact EHX Customer Service for information on warranty repairs at
[email protected] or +1-718-937-8300. USA and Canadian customers: please obtain a
Return Authorization Number
(RA#) from EHX Customer Service before returning
your product. Include ̶ with your returned unit ̶ a written description of the problem
as well as your name, address, telephone number, e-mail address, RA# and a copy of
your receipt clearly showing the purchase date.
United States & Canada
Europe
EHX CUSTOMER SERVICE
JOHN WILLIAMS
ELECTRO-HARMONIX
ELECTRO-HARMONIX UK
c/o NEW SENSOR CORP.
13 CWMDONKIN TERRACE
47-50 33RD STREET
SWANSEA SA2 0RQ
LONG ISLAND CITY, NY 11101
UNITED KINGDOM
Tel: 718-937-8300
Tel: +44 179 247 3258
Email: [email protected]
Email: [email protected]
The CE logo indicates that this product has been tested and shown to
conform with all applicable European Conformity directives.
The WEEE or “trashcan” logo indicates that this product is made up of
electronic components that should not be trashed alongside household
waste but instead should be recycled by a proper electrical waste facility.
