Press and hold the SELECT knob for approximately 3 seconds to save the current
HOG2 setting to the preset number currently displayed. After holding the SELECT
knob for 3 seconds, the numbers will disappear for 1 second, indicating that the
preset has been saved.
- SAVING AND LOADING -
SAVING A PRESET
To save your current HOG2 setting, turn the SELECT knob until the HOG2 FC displays
the preset number you would like to save to. Now press and hold the SELECT knob
for 3 seconds. After 3 seconds the digits will go blank, indicating that the preset is
saved. You can now release the SELECT knob.
LOADING A PRESET
There are two ways to load a preset: the UP/DOWN footswitches or the SELECT
knob. Use the UP/DOWN footswitches to load the selected number, if the preset is
not already activated. Once a preset is loaded, use the UP/DOWN footswitches to
increment/decrement through the presets. The footswitches will both load and
change the preset number simultaneously.
Use the SELECT knob to scroll through the presets. Press and release SELECT to load
the currently displayed preset number.
EDITING A PRESET
If you load a preset and then move a slider or change a mode on the HOG2 main
unit, you will see both the PRESET LED on the HOG2 and the decimal point on the
HOG2 FC blink rapidly. The rapidly blinking LED indicates that the currently loaded
preset has been changed or edited in some way. If you would then like to save this
edit, turn the SELECT knob to a new number, then press and hold the SELECT knob
for 3 seconds. Release the SELECT knob after the digits go blank. While you are
turning the SELECT knob to a new preset number, the digits will blink rapidly
indicating that the currently displayed number is not the preset that is loaded.
UNLOADING A PRESET
Unloading a preset will allow the HOG2 main unit to go back to its What You See Is
What You Get Mode, where all the current slider positions indicate the HOG2’s actual
setting. To unload the current preset, press and release the SELECT knob. Upon
unloading, both the PRESET LED on the HOG2 main unit and the decimal point on the
HOG2 FC will turn off.
-
POWER
-
Power for the HOG2 Foot Controller comes from the HOG2 main unit, through the
1/4” instrument cable. The Foot Controller does not require batteries or a separate
AC Adapter. Its only source of power is the HOG2.
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and
return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will
repair or replace, at its discretion, a product that fails to operate due to defects in
materials or workmanship for a period of one year from date of purchase. This
applies only to original purchasers who have bought their product from an authorized
Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the
unexpired portion of the original warranty term. If you should need to return your
unit for service within the warranty period, please include a brief description of the
problem as well as you name, address, telephone number, copy of your receipt, and
a check or money order. The costs for shipping and handling are listed below.
United States - $12
Canada - $15
Europe and other countries - $25
Ship to:
Electro-Harmonix
C/O New Sensor Corporation
55-01 2nd Street
Long Island City, NY 11101
Attn:
Service Department
Please make checks/money orders payable to New Sensor Corporation.
To hear demos on all EH pedals visit us on the web at
www.ehx.com.
Email us at
