ELECTRO FREEZE Arctic Swirl
®
Model HDM75A-----1
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
16
184984
6.10
Fuse Replacement
6.
Test each fuse and replace if needed.
Replace only with Slo-Blow Buss type
MDA10. Replace with Electro Freeze
original replacement parts only:
- Fuse 10A
7.
Reassemble making sure wires are
routed away from sharp edges and
moving shaft.
8.
Test operation. If unit fails to operate
or blows another fuse, discontinue use
and seek a serviceman.
CAUTION
To avoid electrical shock
or contact with moving
parts, make sure all
switches are in the "OFF"
position and that the main
power supply is discon-
nected.
1.
Disconnect blender from power source.
2.
With blender in normal upright posi-
tion, remove 4 phillips head screws in
top cover (2) and remove cover.
3.
Remove 4 screws in motor cover (2)
and 4 screws in the slot cover (2)
underneath the motor cover.
4.
Remove slot cover and gently pull
motor cover forward so it rests on both
stainless steel splash guards (27).
5
Attached to the inside of the blender
base is the electronic speed control
board (42). Use a small straight blade
screwdriver to pry out the closest end
of the fuse and remove the fuse by
hand.
