Electrix WARPFACTORY Insructions Download Page 2

C A U T I O N

A T T E N T I O N :

 

R I S Q U E   D E   C H O C   E L E C T R I Q U E   -   N E   P A S   O U V R I R

W A R N I N G :

 

T O   R E D U C E   T H E   R I S K   O F   F I R E   O R   E L E C T R I C

S H O C K   D O   N O T   E X P O S E   T H I S   E Q U I P M E N T   T O   R A I N   O R   M O I S T U R E

R I S K   O F   E L E C T R I C   S H O C K

D O   N O T   O P E N

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated ìdangerous voltageî within the
productís enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.

The exclamation point within a equilateral triangle is
intended to alert the uset to the presence of importat
operating and maintenance (sevicing) instruction in
the literature accomanying the product.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSON

I M P O R TA N T   S A F E T Y   I N S T R U C T I O N S

R E A D   A N D   S AV E   T H E S E   I N S T R U C T I O N S

WARNING - When using electric products, basic precautions should always be followed, including the following:

1. Read all the instructions before using the product.
2. Do not use this product near water - for example near a bathtub,
washbowl, kitchen sink, in a wet basement, or near a swimming pool,
or the like.
3. This product should be used only with a cart or stand that is
recommended by the manufacturer.
4. This product, either alone or in combination with an amplifier and
headphones or speakers, may be capable of producing sound levels that
could cause permanent hearing loss. Do not operate for long period of
time at high volume level or at a level that is uncomfortable. If you
experience any hearing loss of ringing in the ears, you should consult
an audiologist.
5. The product should be located so that its location or position does
not interfere with its proper ventilation.
6. The product should be located away from heat sources such as
radiator, heat registers, or other products (including amplifiers) that
produce heat.

7. Clean only with a damp cloth. Before cleaning the unit, turn off the
power and unplug the power cord from the outlet.
8. The power supply cord of the product should be unplugged from the
wall outlet during lightning storms or when left unused for a long periods
of time.
9. Use only with attachments/accessories specified by the manufacturer.
10. The product should be serviced by qualified service personnel when:

A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquids has been spilled into the product; or
C. The product has been exposed to rain; or
D. The product does not appear to be operate normally or exhibits a
marked change in performance; or
E. The product has been dropped, or the enclosure damaged.

11. Do not attempt to service the product beyond that described in the
user maintenance instructions. All other servicing should be referred to
qualified service personnel.

This product may be equipped with a polarized line plug ( one blade wider than the other). This is a safety feature. If you

are unable to insert the plug into the outlet, contact an electrician to replace your obsolete outlet, Do not defeat the

safety purpose of the plug.

For Polarized Line Plug:

Caution:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Attention: 

POUR …VITER LES CHOCS …LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE

DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JASQUí AU FOND.

IMPORTANT:

THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

BLUE: NEUTRAL
BROWN: LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in you plug, proceed as follows.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Under no circumstances must either of the above wires be connected to the earth terminal of the three pin plug.

For the USA

For Canada

For the U.K.

Summary of Contents for WARPFACTORY


















Reviews: