![Electrix RC Circuit Instruction Manual Download Page 6](http://html.mh-extra.com/html/electrix-rc/circuit/circuit_instruction-manual_2379613006.webp)
5
1/10 electrIc stadIuM truck
en
Note: Charger
power outlet
terminals not
shown.
Compatible
Battery
Charger
Attach battery connector to
the charger correctly.
7.2V NiMh battery
ALWAYS use fully charged batteries in the transmitter.
Low battery power can result in loss of control of the
R/C vehicle.
NEVER install damaged batteries, batteries of mixed
types or batteries of different ages in the transmitter.
Remove exhausted batteries.
NEVER store transmitter with batteries installed.
1. Slide panel open on
bottom of transmitter.
2. Obey battery plus (+)
and minus (-) diagram
in transmitter to install
eight (8) AA batteries.
3. Slide panel closed on
transmitter.
installing transmitter batteries
•
Read all safety precautions and literature prior to use of this
product.
•
Never allow minors to charge battery packs without adult
supervision.
•
Never attempt to charge dead or damaged batteries.
•
Never charge a battery if the cable has been pinched or
shorted.
•
Never allow batteries or charger to come into contact with
moisture at any time.
•
Never charge batteries in extremely hot or cold places
(recommended between 50–80 degrees Fahrenheit) or place in
direct sunlight.
•
Always use only NiMH rechargeable batteries. This charger
cannot charge batteries such as “heavy duty,” “alkaline battery,”
or “mercury battery.”
•
Always connect the positive red lead (+) and negative black lead
(-) terminals of the battery to the charger terminals correctly.
•
Always disconnect the battery and charger after charging, and
let them cool between charges.
•
Always inspect the battery before charging.
•
Always terminate all processes and contact Horizon Hobby if the
product malfunctions.
•
Always make sure you know the specifications of the battery to
be charged or discharged to ensure it meets the requirements of
this charger.
•
Never connect more than one battery pack to this charger at a
time.
•
Always constantly monitor the temperature of the battery pack
while charging.
•
Always end the charging process if the charger or battery
becomes hot to the touch or starts to change form during the
charge process.
charging the battery
Always charge
Batteries away from
flammable materials.
Never leave
charging Batteries
unattended.
Never charge
Batteries outside
recommended levels.
Never charge
damaged Batteries.
Note: The vehicle battery charger
produces 300 milliAmps per hour.
Divide the mAh capacity on the
label of a battery by 300 to know
how long battery charging will
require. For example, an 1800
mAh battery requires six (6) hours
to charge.
Note: Alkaline AA size batteries are recommended.
Note: Optional AA NiMh battery charger DYN1970 is
available. Use only batteries approved for use with
that charger. DYN1970 2300mAh Tx NiMH Conversion
Kit:FUT, ECX