Installation and Operation
1. After removing the packaging materials, there should be 2 items:
a. MD600 Dehumidifier
b. AC/DC Power adaptor
2. Plug the DC power jack (11) of AC/DC power adaptor to the DC Power socket (8),
then connect the AC plug (12) of the AC/DC power adaptor to the appropriate main
socket.
3. Press the “On/Off” button (1) to “On” position, the green LED will be turned on.
The MD600 Dehumidifier will begin to operate. You should able to feel the air
blowing from dry air outlet (6) [as fig-1]
4. To switch off the unit, press “On/Off” button (1) to Off” position, the MD600
Dehumidifier will be turned off. [as Fig.2]
WATER DRAINAGE
When the water tank is full with approximately 2 litres of water collected, the unit
will be switched off automatically and the “Yellow” LED(3) will be on.[as Fig.3]
To remove the water tank (13), first switch off the MD600 Dehumidifier, press
“On/Off” button to the “Off” position. Then, remove the water tank from the unit
and pour the water out in to a toilet or sink. Put the water tank back into the unit. To
continue dehumidifying, push the “On/Off” button to “On” position again.
CLEANING
Before cleaning the unit, turn off the MD600 Dehumidifier
and unplug the AC plug from the main socket first and
observe full safety instructions. Use a piece of soft cloth to
clean the surface of the product or use a brush to wipe the
dust off the grills Inlet(4)and air outlet(6).
All manuals and user guides at all-guides.com
