9
OPERATION
Plug in the power cable, the heater will bleep. The heater is in “Stand By” mode, the
POWER indicator will be illuminated blue.
TO TURN ON
Press the POWER button and the indicator will turn white, indicating the
heater is on. The heat will default to level 3.
TO SELECT THE
HEAT LEVEL
Repeatedly press the HEAT button to select the heat output. There are 5
levels between 1 (Low) and 5 (High). The display will stop flashing the
currently selected heat level after 5 seconds.
TO SELECT THE
LED
BRIGHTNESS
Repeatedly press the LAMP button to select the brightness of the LED
lights. There are 5 levels between 1 (Low) and 5 (High). The display will
stop flashing the currently selected brightness level after 5 seconds.
TO TURN OFF
THE LED LAMP
Press the LAMP button immediately followed by the POWER button.
TO TURN OFF
THE HEATING
Press the HEAT button immediately followed by the POWER button.
TO PUT THE UNIT
IN STANDBY
Press the POWER button.
CONTROL PANEL
BUTTON
FUNCTION
POWER
Press to turn the heater on or off. Can also individually turn off the Heat /
Light by pressing the Heat / Lamp button immediately before the Power
button.
HEAT
Press to turn On the heating tube. Repeatedly press to select the power
level between 1 (Low) and 5 (High).
LIGHT
Press to turn on the LED light. Repeatedly press to select the
brightness between 1 (Low) and 5 (High).
LCD DISPLAY
Displays the heat level of the heating tube when in heating mode. When
the LIGHT button is pressed the display will show the brightness.
POWER
LAMP
HEAT
