5
Control Panel Features
Controls and Features
Setting Adjustment Buttons
and
: Touch the Mode icon
until the
temperature display flashes. The Default temperature of 56 °C will flashes on the
display screen, meaning that it is ready to be changed.
Press and hold the increase
or decrease
to set target temperature in
increments of 1°C. Short presses will change the temperature in increment of
0.1°C.
Note: The temperature set range is 40 - 90°C.
Set cooking time: Touch the Mode icon
twice until the timer display flashes.
The default time of 08:00 will flash on the display screen, meaning that it is ready
to be changed,
Press and hold the increase
or decrease
to set timer in increments of 1
minute up to 2 hours, then 30 minutes intervals up to 72 hours.
Note: the time set range is up to 72:00 hours.
Settings Range
Default settings: temperature: 56 °C and time: 08:00 hours
Temperature setting range: From 40 °C to 90 °C
Time setting range: From 10 minutes up to 72 hours
Troubleshooting
If you experience any problem with your appliance, try these helpful tips.
Error code E1:
When the water level falls below the MIN threshold mark on the
circulator, it will trigger a sensor and cause the circulator to stop. Error code E1
will be featured on the display. Turn the appliance off, add sufficient water, turn it
on again and the circulator will resume the cooking process.
Error code E4:
When the water level falls below the MIN threshold
mark on the circulator, and the water shortage sensor fails to activate, it will trigger
the dry boil sensor and the circulator will stop. Error code E4 will be featured on
the display. Turn the appliance off, add sufficient water and turn it on again. When
the circulator has sufficiently cooled down, the circulator will resume the cooking
process.