SERVICE MODE
To access the service mode
1. Open the door of the microwave
2. Hold
“3” for 5 seconds to enter service mode.
The Display will show
“SErU”
To check the number of times the door of the microwave has been opened Press
“3”
To reset the door counter, while in service mode press
followed by
“4” within 3
seconds. The counter will clear and
“4-CL” will be displayed.
MICROWAVE SETTINGS
Many settings for microwave are customisable, allowing it to be set up to suit its intended
use. To change the settings:
1. Open the oven door
2. Hold
“2” for 5 seconds
The Buzzer will sound, and the microwave will display
“OP: --“
3. Repeatedly press the option number of the setting that requires changing, to scroll
through the available options. The currently selected option will be displayed on the
screen.
i.e To change the Bleep Volume to low (21), Repeatedly press
“2” to scroll between 20
(Off) and 23 (High) until
“OP:21” is displayed on the screen.
4. When the desired value is shown on the screen, Press
to save the new setting.
To exit without making a change press
, or close the oven door.
Please see the table on the following page for details of the settings that can be amended
and their default values.
FACTORY RESET
To return the microwave back to its factory default settings, press
and
“0” at the same
time.
12
