Put the ingredients into the jug, don’t fill past the max mark.
Put the lid on the jug.
Power Up
Check that the speed control is set to 0.
Put the plug into the power socket.
Speed Control
Press the speed control button for low speed, high speed.
Then press the on/off button.
Press the on/off button, then the motor off.
Use low speed (1) for lighter applications, using mainly liquid ingredients, and high speed (2)
for heavier applications, using mainly solid ingredients.
Pressing the pulse button will give you a short burst at high speed, for more precise control.
Using the Blender
Lower the jug on to the motor unit, then turn the jug clockwise, to lock it in place.
Pull the lid up and off the jug – it’s stiff, because of the seal.
Put the ingredients into the jug - don’t fill past the max mark.
Put the lid on the jug, and push it down to seat it.
Align the pips on the cap with the slots in the hole, fit the cap in the hole, and turn clockwise.
Don’t run the blender without the cap.
To add ingredients while the motor is running:
a)
turn the cap clockwise to unlock it, and lift it off
b)
add the ingredients via the hole
c)
replace the cap and turn it anti-clockwise to lock it
Turn the jug anti-clockwise to unlock, and lift it off the motor unit.
Crushing Ice
Start with three quarters of a cup of ice, or 4 to 6 cubes, and add 15ml (1 tbsp) of water.
Put the lid on the blender, then press the pulse button for a second or so, check the state of
the ice, and repeat till the ice is the consistency that you need.
Care and Maintenance
Switch off and unplug before cleaning.
Wipe the outside of the motor unit with a clean damp cloth.
Hand wash the removable parts.
If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface
finishes.
