ElectrIQ eiQFFSTD7, User Manual, Page: 8 / 16

8
ADJUSTING THE FEET
Once the dryer is in its permanent
position it should be checked to
ensure it both level and stable.
Using a spirit level the feed should
be adjusted.
NOTES REGARDING POSITIONING

The appliance must be installed indoors. Do not install in a
position where is may be exposed to rain or excessive
moisture.

Do not place the rear of the dryer close to curtains, or
anything that could be caught by wind.

Do not place the dryer near gas appliances or close to
anything flammable.
FITTING THE VENT PIPE
Attach the vent pipe to the rear of the appliance using the
adaptor pre fitted to the vent pipe. Route the pipe so the
opposite end will expel the hot air outside. Where possible
bends to the pipework should be minimized.