8
Drill 2x8mm holes & insert screws & wall
plugs to further secure the hood.
Measure where the hood chimney will be
located and drill 2 holes for each chimney
bracket. Secure the brackets with screws.
Fix the V-flap to the air outlet and if
using a vent pipe (not included) fix the
vent pipe to the V-flap.
Put the upper chimney into lower chimney.
Then pulling out the upper chimney
upwards. Adjust to reach the height
required.
There are 2 methods for installing the
chimney cover:
1. After drilling the 2 holes and fixing
the bracket, hang the chimney cover
by matching the both side lock.
(Pic1)
2. After drilling the 2 holes and fixing
the bracket, install the chimney cover
by locking with 2 screws in both side
holes. (Pic2)
