8
4. There are metal sliders at both sides,
connecting with 2 screws per each slider.
Screw out the outer 2 screws on both
sliders, keep these screws safe. Loosen the
inner 2 screws, so that the slider can move
to inside or outside the body.
5. Move the slider inside the hood body, put the hood into
the cabinet. Then move the slider outside the body so that
the hood can be mounted onto the cupboard. Tighten up the
screws on the sliders so that they can be firmly fixed.
6. Connect the light wire and assemble the outer glass frame panel by 4
screws.
7. Install the outlet and expansion pipe: install the outlet on the cooker hood,
then cover the expansion pipe on the outlet and lead it to outdoor.
CARBON FILTER
(Available separately)
Activated carbon filters can be used to trap odors, and must be used if the hood is not vented
to the outside. They are available from the same stockist you purchased the hood from under
the following reference:
EIQTMCARBONCURV