11
SETTINGS
INITIAL SETUP
How to turn the TV on or off
1. Insert the plug into the power socket.
2. If TV is in standby mode, press
POWER
button on the
remote control or press the joystick on the rear of the TV.
3. The picture will be displayed on the screen after 15 seconds. If no signal input, "No Signal" will
be displayed on the screen.
4. If temporary POWER off is required, press
POWER
button on the remote control or press the
joystick on the rear of the TV. The TV will enter standby mode.
5. If you want to completely switch off the power for the unit, unplug the tv, or switch off at the
mains, after putting the TV into standby using the remote or the joystick on the rear of the TV.
6. After switching off the unit, you should wait at least 5 seconds before switching on again.
Status indication lamp
Light on: In standby mode.
Light off: In power on mode.
Auto power-off
1.
If there is no signal, the TV will automatically enter standby mode after 10 minutes of inactivity.
2.
In VGA mode, if there is no input for 15 seconds, the TV will enter standby mode.
Memory before turning TV off
The picture and sound settings and preset channels will be memorized at the point when the TV is
turned off. When the TV is started up again it will work according to the previous settings.