CUSTOMISING YOUR AIR CONDITIONER
12
OPTIONAL PANELS FOR THE INDOOR UNIT
Your air conditioner is supplied with a white front panel but can be customised with the addition of optional
front panels, allowing you to choose the look that best suits your room and preferences. These are available
from the same retailer as the air conditioner under the following codes:
eiQ-9WMINV-V3
MIRROR BLACK
eiQ-Panel9KWM-MB
SILVER
eiQ-Panel9KWM-SV
CHAMPAGNE
eiQ-Panel9KWM-CH
eiQ-12WMINV-V3
MIRROR BLACK
eiQ-Panel12KWM-MB
SILVER
eiQ-Panel12KWM-SV
CHAMPAGNE
eiQ-Panel12KWM-CH
for further details on the range
HOW TO CHANGE THE PANEL
1.
Disconnect the power from the appliance.
2.
Before removing the panel, remove the screw holding the display panel in place, and slide away
from the front panel.
3.
Release the clips on the side of the display panel to release the front cover.
4.
Remove the 2 screws holding the circuit board into the display panel base.
5.
Remove the circuit board and fit into the new display panel base.
6.
Use the 2 screws removed in step 4 to secure the circuit board.
7.
Clip the new front cover for the display panel onto the display panel base.
8.
Fully open the panel, and unclip from the front of the unit.
9.
Clip the hinged of the replacement panel into position.
10.
Fit the display panel into the back of the panel, securing with the screw removed in step 1.