5
INSTALLING OR REPLACING THE FILTERS
Note:
For convenience HEPA and activated carbon filter are combined in one easy
replaceable filter cartridge.
High performance filters are not washable, keep them dry at
all times and vacuum regularly.)
1.
Unplug the device from the mains.
2. Turn the unit upside down
3.
While holding the base of the unit twist the filter cover
anti-clockwise to gain access to filter chambers
4.
Ensure the plastic wrap is removed from the filter prior to
installation.
5.
To install or replace the filters just place the filter
cartridge into the slot after removing the original one.
6.
The device should not be turned on until the filter
compartment cover is twisted back into place and
secured.
Do not operate the unit without a filter.
DIAGRAM
Filter cover
HEPA and activated
carbon cartridge
Clean air outlet
Air inlet
Power cord connector
