Page
16
of
24
CONNECTING USING APP MODE ALTERNATIVE METHOD
Before initiating the connection, make sure the unit is in standby mode, with the WiFi Light
Indicator flashing once per second. If not follow the instructions for changing the Wi-Fi
connection mode. Also ensure your phone is connected to the Wi-Fi network. (We advise
turning mobile data off during setup)
1.
Open app and press “+” to
add device, or use the add
device button
2. Select the type of device
as “Heater” within the Home
Appliance tab.
3.
Press on the AP mode button
in the top right of the screen.
4. Ensure the WiFi indicator on
the heater is slowly flashing
(once per second), then press
on the orange button at the
bottom of the screen to
confirm
5. Enter your Wi-Fi password and
press confirm.
6. Go to network settings in your
phone and connect to the
“SmartLife xxx” connection.
There is no password to enter.
Then return back to the app to
complete setup.
This will then transfer the settings to the heater.
Once the connection process has completed, go back to the network settings on your phone to ensure your
phone has reconnected to your Wi-Fi router.