ElectrIQ DF24B User Manual Download Page 3

 

 

 

SAFETY INSTRUCTIONS 

Important! 

 

Carefully read the instructions before operating the unit 

 

This appliance is for indoor use only. 

 

Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet. 

 

Installation must be in accordance with regulations of the country where the unit is used. 

 

If you are in any doubt about the suitability of your electrical supply have it checked and, if 
necessary, modified by a qualified electrician. 

 

This fan has been tested and is safe to use. However, as with any electrical appliances - use 
it with care.   

 

Disconnect power plug from socket before dismantling, assembling or cleaning the unit 

 

Avoid touching any moving parts of the appliance. 

 

Never insert fingers, pencils or any other objects though the guard   

 

This appliance is not intended for use by persons (including children) with reduced physical, 
sensory  or  mental  capabilities.  It  is  also  not  intended  for  use  by  those  with  a  lack  of 
experience  and  knowledge,  unless  they  have  been  given  supervision  or  instruction 
concerning the use of the appliance by a person responsible for their safety.   
Do not leave children unsupervised with this appliance. 

 

Do not clean the unit by spraying it or immersing it in water.   

 

Never  connect  the  unit  to  an  electrical  outlet  using  an  extension  cord.  If  an  outlet  is  not 
available, one should be installed by a qualified electrician. 

 

Never operate this appliance if the cord or plug is damaged. Ensure the power cord is not 
stretched or exposed to sharp object/edges. 

 

A damaged supply cord should be replaced by the  manufacturer or a qualified electrician 
in order to avoid a hazard. 

 

Any  service  other  than  regular  cleaning  should  be  performed  by  an  authorized  service 
representative. Failure to comply could result in a voided warranty. 

 

Do not operate the fan unassembled without protective front and rear grilles in position. 

 

Do not use the appliance for any other purposes than its intended use. 

 

Never  use  the  mains  plug  as  a  switch  to  start  and  turn  off  the  fan.  Use  the  provided 
ON/OFF switch located on the control panel. 

 

Always place the unit on a dry and stable surface. Do not move or tilt the unit 

 

High Velocity fans are designed to create rapid air movement, therefore make sure the fan 
is not placed near curtains or any objects that may be drawn into the fan inlet. 

 

The appliance should not be installed in laundry or wet rooms   

 

Do not use this unit in environments with flammable and explosive gases. 

 

Avoid keeping the unit in direct sunlight for a long period of time 
 

Energy Saving and Unit Safety Protection Tips 

 

Do not cover or restrict the airflow. Do not use in dusty environment. 

 

For maximum performance the minimum distance from a wall or objects should be 50cm.   

Warning:

 To reduce the risk of fire or electrical shock, DO NOT USE THIS FAN with any SOLID 

STATE Speed Control Device or any variable speed controllers. 

Summary of Contents for DF24B










Reviews: