4
•
Never use the mains plug as a switch to start and turn off the air conditioning unit. Use
the provided ON/OFF switch located on the control panel.
•
Always place the unit on a dry and stable surface.
•
The appliance should not be installed in laundry or wet rooms.
•
The appliance must be placed in a room without sources of ignition (for example:
open
flames, an operating gas appliance or an operating electric heater).
•
R290 refrigerant gas complies with European environmental directives.
•
R290 has a low GWP (Global Warming Potential) of 3.
•
The air conditioners contain around 250 g of R290 refrigerant gas.
•
Do not use or store in an unventilated space with an area smaller than 12 m
2
per unit.
•
The room must be such as to prevent stagnation of possible leaks of refrigerant gas as
there could be a danger of fire or explosion should the refrigerant come into contact with
electric heaters, stoves or other sources of ignition.
•
Refrigerant gas may be odourless.
•
Do not use the product and contact the retailer for advice, if damage has occurred to the
unit which may have compromised the refrigerant system.
•
Any repairs or maintenance must only be carried out on the unit by a suitably qualified
engineer. Before opening and servicing the unit the authorised engineer must be in
possession of a copy of the manufacturer’s service manual and must follow the safety
information contained within it to ensure all hazards are minimized.
•
The refrigerant system should not be perforated or punctured.
Energy Saving and Unit Safety Protection Tips
•
Do not cover or restrict the airflow from the air outlet or inlet.
•
For maximum performance the minimum distance from a wall or objects should be
50cm.
•
Keep the filters clean. Under normal conditions, filters should only need cleaning once
every three weeks (approximately). Since the filters remove airborne particles, more
frequent cleaning maybe necessary, depending on the air quality.
•
For the initial start-up set the fan speed to maximum.
•
To protect the unit, we recommend not using the cooling function when the ambient
temperature is higher than 45
o
C or lower than 18
o
C.