Electric Signal MMXV AD
Page 17
Delta Transconductace band Compressor
User Manual
Page 18
When switched to “mono”, the amount of
compression of the right channel is independent
of the left channel. When switched to “link” the
control voltage is combined, left and right
channel are reduced in gain by the same number
of dB.
Six meters, mid, high, low and left.right measure
the current trough the remote cutoff valves
responsible for the gain reduction/compression
and therefore measures the gain reduction. Over
time while the tubes age and the conductance of
them lowers, the meters may drop. However the
bias can be recalibrated if this occurs (see III.3)
IV.
2.6
Stereo link
Mutes the channel.
IV.
2.7
Mute
IV.
3
Gain reduction
meters
24 position rotary switch, controls the output
gain, with a resolution of 1 dB per step.
Removes all the electronics from the signal chain
and links the input to the output, see the block
chain IV.1.
IV.
4
Main output
If the main output rotary switch is turned
completelyanti clockwise to the - the output is
muted.
IV.
4.1
Main Mute
IV.
4.2
Main system
bypass
11 position rotary switch, controls the output
gain, with a resolution of 1dB per step, Notify that
this control can effect every compressor in the
unit. In combination with the input gain 121
gain combinations are possible
IV.
4.3
Main input
