USER MANUAL - 2021
39
11. Maintenance
11.1 Raising the bike on a stand
-
Stop the vehicle ( 9.5).
-
Raise the motorbike with an adjustable or non-adjustable
stand, placing it under the engine block.
Ensure that you are on level ground to prevent the
motorbike from falling off the stand.
Be careful when lifting the motorbike if you do not have an
adjustable stand.
Ensure that the motorbike is securely held before releasing it to
prevent the vehicle from falling.
11.2 Front fork dismounting
–
mounting
Dismounting
-
Stop the motorcycle (
9.5).
-
Install the motorcycle on a stand (
12.1).
-
Remove the front plate (
11.1).
-
Remove the front mudguard (
15.1).
-
Dismount the front brake caliper with a 5mm Allen key.
-
Unscrew the upper and lower clamp with 4mm Allen key
-
Slide the fork to remove it from the clamp
-
Carefully let the front brake caliper/offset bracket
assembly hang from the end of the brake hose.
-
Loosen the upper tee bolts with a 4mm Allen key.
-
Loosen the lower tee bolts with a 4mm Allen key.
-
To remove the fork arms, carefully slide them out one by
one, towards the ground.
