Sales Demo Kit
Assembly and Operating Instructions
ELECTRIC MIRROR®
ELECTRIC MIRROR®
425.776.4946
|
electricmirror.com
|
|
© 2020 Electric Mirror. All rights reserved.
1.0320.MC
4.
The next tap increases the light level to 25%.
5.
The next tap returns the light level to 66%.
6.
Continued tapping will repeat this cycle from 66% to 100% to 1.5% to 25% to 66%, etc.
Next, demo the “touch-hold” method.
1.
Start with the light at 66%.
2.
Touch-hold the button to gradually increase the light to 100%.
3.
Once the light reaches 100%, release your touch-hold.
4.
Touch-hold again and the lights will gradually decrease from 100% to 25%.
5.
Lights must be increased to 100% before they can start dimming; they need to reduce to 25% (a full
cycle) before they begin increasing again.
Finally, demo the automatic dimming.
1.
In normal operations, Keen automatically dims after one hour of non-use. If the lights are at any level
above 25%, they will automatically dim to 25% after one hour.
2.
For this demo mirror, however, the automatic dimming has been shortened and set at 20 seconds.
3.
When you first turn Radiance on, the lights will initiate at 66%. At any time during your demo, if you
aren’t using Keen to adjust the lights, they will automatically dim to 25% after 20 seconds.
4.
To best demo automatic dimming, set the light level to 100%, then leave it. After 20 seconds lights
will dim to 25%.
SEAMLESS CLOCK TECHNOLOGY OPERATING INSTRUCTIONS
The Seamless™ LED Clock is an inexpensive, elegant way to keep track of
time. Using the provided remote, you can demonstrate how to change the
hours and minutes, how to change from a 12 to 24-
hour clock, and how to
brighten or dim the LED clock display.
First, demo changing the time.
1.
Point the remote at the clock. Using the HOUR button, increase, then
decrease the hours.
2.
Using the MIN button, increase, then decrease the minutes.
Next, demo changing from a 12 to 24-hour clock.
1.
Tap the 12/24 button.
2.
Then tap the HOUR button to increase hours past 12 to 13, 14, etc.
Finally, demo changing the brightness level of the LED display
3.
Using the + and – buttons under the Sun icon, change the brightness
levels.
4.
With each tap of either the + or – button, a number will flash indicating
the brightness level:
5.
1:00 = 100% brightness
6.
:75 = 75% brightness
7.
:50 = 50% brightness
8.
:25 = 25% brightness
9.
:00 = dimmest light level available
