Made in USA
ELECTRIC MIRROR, LLC
Seattle, WA • USA
T +1 425 776–4946
F +1 425 491–8200
www.electricmirror.com
ELECTRIC MIRROR®
THE LEADER IN LIGHTED MIRROR AND MIRROR TV TECHNOLOGY
© 2013 ELECTRIC MIRROR®
Unpacking your Lighted Mirror
Verify Contents
Prior to installation, unpack items and verify contents. The backlit mirror comes with 2
boxes:
2) Mirror with 15.4" LCD
TV
Before proceeding to power supply wiring, check wiring details at the terminal block.
Halogen sockets are prewired to the terminal block by 3 neutral(blue) and 3 live(red) wires that
are connected to the third and fourth slot respectively. The second slot is for ground(green) wire
and it is connected to ground point (see figure).
Insert power supply cable through chassis knockout located at top of the chassis. Then
screw power supply cable to terminal block. Make sure each wire in power supply cable is
screwed correctly to terminal block according to its color.
2) POWER CONNECTION
Remove mounting bracket from top of chassis and detach power cover on chassis.
Please note, all electrical installations should be carried out by a fully qualified
electrician in conformance with the National Electrical Code.
2) Wiring Details
Before mounting chassis on wall, identify mirror location on wall. Drill marks should be
measured from the edge of the mirror
NOT FROM EDGE OF CHASSIS
.
There are 20 mounting holes that can be chosen from to accommodate mounting
locations. It is recommended to hang the chassis with 4 screws. Use screws that
can fit the mounting holes and can support the mirror. Use wall anchors or reinforced
areas to support chassis. See individual product specifications for mounting hole
locations.
1) Mounting chassis on the wall
Installation
Box 1: Chassis Assembly
Label will include part number: FUS-QUA-(size)-C
Box 2: Mirror Assembly With Integral Hangers
Label will include part number: FUS-QUA-(size)-M
Front View
Back View
