TROUBLESHOOTING
(CONTD.)
ERROR
CODE
PROBLEM
CAUSE
21
Current Issue
• Damaged Motor Cable (Short Circuit)
• Controller Problem or Motor Problem
22
Throttle Stuck On
• Bent Pin on the 4-to-1 Cable
23
Motor Phase
(Power) Issue
• Motor Cable is Not Plugged In All the Way
• Current Limit (ST7) is Too Low for Conditions
• Controller or Motor Problems
24
Motor Hall
Sensor Issue
• Motor Cable is Not Plugged In All the Way
• Bent the Small Pin on the Motor Cable
• Damage to the Wire on the Motor Cable
25
E-Brake Issue
• Parking Brake is Stuck On Before Power On
• Brake Cable Isn’t Fully Plugged In
30
Communication
Issue
• Controller or Motor Problem or Bent Pins
• 4-to-1 Accessory Cable is Damaged
• Controller May be Damaged
ERROR CODES FOR THE 2017 LCD
If an error code occurs, your trike will likely not function. On the LCD,
the error code will be displayed in the speed section. Below is a list
of six error codes. Please check the area (cause) to find the problem.
Please contact customer service for further assistance if you don’t see
an error code listed below.
If any of these components are worn, cut, scratched, and/or damaged,
then
DO NOT
ride your electric Fat Trike until you contact customer
service at
1-800-375-0224
and the components have been replaced.
Go to page 40 and learn Why Doesn’t my Motor Run?
[
41
]