manualshive.com logo in svg

Electrex Flash-D, Installation Manual

Share
Download
Electrex Flash-D Installation Manual Download Page 35

 

 

  

Pag. 35 di 37

 

 
 
 

5.2.1.6  Tariff Energies and Tariff Maximum Demand  (for X3M-D only) 

 
By pressing the 

 key for 2 seconds from any page, it is possible to display the Energy counters and the 

Max Demand of each tariff. 
 

 

 
The top left symbol identifies the parameter being displayed and the Maximum Demand reading is shown 
next to it. 
The tariff number is indicated on the top right while the energy reading is indicated below. 
 
All the energy and MD readings applicable to the 8 parameters of a 4 quadrant measurement are 
foreseen. 
 
Press shortly the 

 key to scroll the different parameters.  

Press the 

 and 

 keys to scroll the different tariffs. 

 
To move back to the traditional reading mode, press the 

 key again for 2 seconds.  

 
NB 
In the case the instrument is not loaded with a proper calendar file or in the case some tariffs are not 
included in the calendar, dashes will be displayed in place of the readings. 
 

Summary of Contents for Flash-D






































Reviews:

No comments

Brands by name

Popular brands

Load more brands