manualshive.com logo in svg

ElectraStream 200, User Manual, Page: 5 / 56

Share
Download
ElectraStream 200 User Manual Download Page 5

5

1-1

Introduction

INTRODUCTION      1

INTRODUCTION      1

INTRODUCTION      1

INTRODUCTION      1

INTRODUCTION      1

1-1.1 The Electrastream System

The Electrastream system by GAH (Heating Products) Ltd. has been developed as a cost
effective solution for domestic hot and cold water and electric central heating with water
filled radiators.
Electrastream is a 9kW - 30,000 Btu system suitable for flats, small dwellings, offices,
home offices and granny annexes.

1-1.2  Electrastream Options Available

Consult GAH (Heating Products) Ltd.

1-1.3 Basic Principles

ELECTRASTREAM
Water in the unvented cylinder is heated by the high powered titanium electric tri-core
heater.  Hot water is drawn from the cylinder and mixed with cold water by a thermostatic
mixing valve; this ensures safer lower temperatures at the hot water outlets.
The hot water within the unvented indirect cylinder also heats the water for the heating
system via the indirect coil within the cylinder.  The circulating pump for the heating
system is controlled by a thermostat and programmable timer with override so that heat
is available on demand, providing there is a supply of hot water.

ELECTRASTREAM PRE-PIPED
Operationally the same as the Electrastream but supplied pre-piped and assembled onto
a mounting frame.

GAH Electrastr

GAH Electrastr

GAH Electrastr

GAH Electrastr

GAH Electrastream Systems ar

eam Systems ar

eam Systems ar

eam Systems ar

eam Systems are pr

e pr

e pr

e pr

e protected pending patent applications.

otected pending patent applications.

otected pending patent applications.

otected pending patent applications.

otected pending patent applications.

Electrastr

Electrastr

Electrastr

Electrastr

Electrastream is a T

eam is a T

eam is a T

eam is a T

eam is a Trademark of GAH (HEATING PRODUCTS) L

rademark of GAH (HEATING PRODUCTS) L

rademark of GAH (HEATING PRODUCTS) L

rademark of GAH (HEATING PRODUCTS) L

rademark of GAH (HEATING PRODUCTS) LTD.

TD.

TD.

TD.

TD.

This Handbook has been compiled to assist in the Installation and Operation of GAH (HEATING PRODUCTS) LIMITED

This Handbook has been compiled to assist in the Installation and Operation of GAH (HEATING PRODUCTS) LIMITED

This Handbook has been compiled to assist in the Installation and Operation of GAH (HEATING PRODUCTS) LIMITED

This Handbook has been compiled to assist in the Installation and Operation of GAH (HEATING PRODUCTS) LIMITED

This Handbook has been compiled to assist in the Installation and Operation of GAH (HEATING PRODUCTS) LIMITED
Electrastr

Electrastr

Electrastr

Electrastr

Electrastream domestic hot water and heating system.

eam domestic hot water and heating system.

eam domestic hot water and heating system.

eam domestic hot water and heating system.

eam domestic hot water and heating system.

© 2009 GAH (HEATING PRODUCTS) LIMITED

© 2009 GAH (HEATING PRODUCTS) LIMITED

© 2009 GAH (HEATING PRODUCTS) LIMITED

© 2009 GAH (HEATING PRODUCTS) LIMITED

© 2009 GAH (HEATING PRODUCTS) LIMITED
Notified Body NB 0558

Notified Body NB 0558

Notified Body NB 0558

Notified Body NB 0558

Notified Body NB 0558

After installation the Installer of the system should give full operating instructions to the householder for the Electrastr

After installation the Installer of the system should give full operating instructions to the householder for the Electrastr

After installation the Installer of the system should give full operating instructions to the householder for the Electrastr

After installation the Installer of the system should give full operating instructions to the householder for the Electrastr

After installation the Installer of the system should give full operating instructions to the householder for the Electrastream

eam

eam

eam

eam

System.  This User and Installation Manual must be left for the end user

System.  This User and Installation Manual must be left for the end user

System.  This User and Installation Manual must be left for the end user

System.  This User and Installation Manual must be left for the end user

System.  This User and Installation Manual must be left for the end user.....

11111

Thermostatic

Mixing Valve

Unvented

Indirect

Cylinder

Incoming

Water Main

Tri-core Heater

Pump

Electrastream

Control

Unit

Fig. 1-1a  Electrastream

Summary of Contents for 200

























































Reviews:

No comments