Electralog ELECTRALOG DFP15-1131HO Owner'S Manual Download Page 11

 

11

This limited warranty does not 

apply to products that have been 

repaired (except by Electralog or 

its authorized service representa-

tives) or otherwise altered.  This 

limited warranty does further not 

apply to defects resulting from 

misuse, abuse, accident, neglect, 

incorrect installation, improper 

maintenance or handling, or 

operation with an incorrect power 

source.

What to do when your unit ceases 

to operate as described in this 

manual:

Defects must be brought to the 

attention of Electralog Technical 

Service by contacting Electralog 

at 1-888-346-7539, or 1367 In-

dustrial Road, Cambridge On-

tario, Canada N1R 7G8.  Please 

have proof of purchase, cata-

logue/model and serial numbers 

available when calling.  Limited 

warranty service requires a proof 

of purchase of the product.

What Electralog will do in the 

event of a defect:

In the event a product or part 

covered by this limited warranty is 

proven to be defective in material 

or workmanship during the 90 day 

limited warranty period you have 

the following rights:

Electralog will in its sole dis-

• 

cretion replace such defective 

part(s) without charge, or if 

part replacement proves not 

to be commercially practi-

cable or cannot be timely 

made, Electralog may, in lieu 

of replacing part(s) choose to 

replace the unit.

This limited warranty does 

• 

not entitle the purchaser to 

on-site or in-home services. 

On-site or in-home services 

may be performed at the 

purchaser’s specific request 

and expense at Electralog's 

then-current rates for such 

services.

The purchaser is responsible 

• 

for removal and transporta-

tion of such product or part 

(and any repaired or replace-

ment product or part) to and 

from the authorized dealer’s 

or service agent’s place of 

business.

Electralog will not be re-

• 

sponsible for, and the limited 

warranty services shall not 

include, any expense incurred 

for installation or removal of 

 Warranty

Summary of Contents for ELECTRALOG DFP15-1131HO














Reviews: