TECHNICAL DRAWING:
TEST:
¾
Slide the switch knob to “ON”, the night lamp
will turn on .Slide to “OFF”, the night lamp
will turn off.
¾
Slide the switch knob to “AUTO”, the night
lamp will be into the automatic mode. At the
beginning it has no signal ,after Warm-up
30sec, the sensor can start work .When the
ambient light is less than 10-20LUX, If the PIR sensor receives the induction signal ,the
night lamp will turn on .While there is no another induction signal any more, after about 20s
the night lamp will turn off.
¾
When it receives the second induction signal, the night lamp will turn on again.
Note: When in the detection area, if it continues to have the induction signals, the night
lamp will not turn off even if the ambient light is more than 20LUX .Only when it
doesn’t receive the induction signal, after about 20s the night lamp will turn off.
NOTE:
¾
The product accessory includes the USB CABLE ,no power adapter
¾
Please charge the power on the first time to use the product
¾
Avoid to look straight at the LED to protect the eyes
¾
Avoid to use it near air condition, central heating, etc
¾
When in “AUTO” mode, please make sure location height of the night lamp should not
exceed height of a human body, otherwise the PIR sensor may not detect.
SOME PROBLEM AND SOLVED WAY:
¾
The night lamp do not work:
a. Please check if it’s no charge
b. Please check if the working light sets correspond to ambient light.
¾
The sensitivity is poor:
a. Please check if there has any hindrance in front of the detection window to affect to
receive the signal.
b. Please check if the ambient temperature is too high.
c. Please check if the induction signal source is in the detection fields.
d. Please check if location height of the night lamp exceeds height of a human body
e. Please check if the moving orientation is correct.
¾
The night lamp not turn off automatically:
a. Please check if there is continual signal in the detection field.
IMPORTER and AGENT in PORTUGAL for the brand electra:
Duarte Neves, Lda.
www.electra.pt
