![Electra C1545B Instruction Manual Download Page 18](http://html1.mh-extra.com/html/electra/c1545b/c1545b_instruction-manual_2378880018.webp)
Testing strip
The washing effectiveness of your machine depends on the softness of the tap water. For this reason,
your machine is equipped with a system that reduces the hardness in mains water supply. The
washing effectiveness will increase when the system is correctly set. To find out the water hardness
level of water in your area, contact your local water board or determine water hardness level by using
the test strip(if available).
Adjusting salt consumption
Table of Water Hardness Level Settings
If the hardness of the water you use is above 90 dF (French hardness) or if you are using well
water; you are recommended to use filter and water refinement devices.
NOTE:
Hardness level is adjusted to level 3 as a factory setting.
Open the
testing
strip.
Run
water
through
your tap
for 1
min.
Keep the
testing
strip in
water for 1
sec.
Shake the
testing strip
after taking it
out of water.
Wait for
1 min.
Make your machine’s water hardness
setting according to the result obtained
through the testing strip.
17
French British
Hardness Level
Indica
t
or
hardness hardness
dF
dE
0-9
0-6
Wash/Dry lamp is on.
End lamp is off.
The Start/Pause lamp lamp is off.
10-20
7-14
Wash/Dry lamp is off.
End lamp is on.
The Start/Pause lamp lamp is off.
21-30
15-21
Wash/Dry lamp is off.
End lamp is off.
The Start/Pause lamp lamp is on.
31-40
22-
28
Wash/Dry lamp is on.
End lamp is on.
41-
ϲϬ
29-
ϰϮ
Wash/Dry lamp is on.
End lamp is off.
The Start/Pause lamp lamp is on.
ϲϭ
-90
4
ϯ
-63
Wash/Dry lamp is off.
End lamp is on.
The Start/Pause lamp lamp is on.
Water German
hardness hardness
level dH
1
0-5
2
6-11
3
1
2
-1
7
4
18-22
5
23-3
ϰ
6
3
ϱ
-50
The Start/Pause lamp lamp is off.