Using the Motion detector
Open the battery compartment. Insert
the batteries (2 x AAA, alkaline), check
polarity. Keep the TEST button (6) pres-
sed for about 4 seconds. The LED will
fl ash once. Release the button. The LED
will fl ash twice. The motion detector has
now chosen a unique code, which can be
registered with your console.
Register your motion detector.
You need to register the MS18 motion
detector with your Home Prosafe system
and your system user guide will show
you how to do this.
Note! If you need to register the motion
detector a second time remove the bat-
teries, and then hold down TEST for 4
seconds to pick up a random code.
Testing your motion detector
Slide 1 / 2 to 1
Press and hold down TEST until the
motion detctor’s LED fl ashes twice, and
then release it.
Wait 20 seconds, and then walk in front
