1. Safety Instructions
IMPORTANT
If the system is handled incorrectly there is a risk of injury from electric shock. The following instructions must be followed, in order to
avoid any risk of injury or damage and the operating instructions must also be adhered to.
.
It is not permitted to open the plug’s mains adapter
.
Only a properly qualified technician is allowed to check and inspect the system.
.
The system is only to be operated in dry indoor rooms.
.
Avoid high atmospheric humidity and extreme ambient temperatures.
.
Should any fault occur in the power supply the system should be taken out of operation at once. Never replace defective
parts with anything other than original spare parts.
.
If there is any danger of a thunderstorm, it is a good precaution to unplug the power supply from the mains network in
order to protect it from lightning. The same applies if the system is to be out of action for any length of time.
.
Power must be supplied at the correct rating at all times. This applies in particular to the operating voltage in the system
and the mains adapter.
.
If there is ever any malfunction, the dealer from whom the system was bought must be asked to send it back to the
manufacturer for inspection.
2. General description
Correct and proper use:
.
The VT30CT Video Transmitter is designed for use in dry indoor rooms. The electrical power is provided by the mains
adapter included with the transmitter.
.
Please only ever use this mains adapter. It is not permitted to alter or modify any part of the system.
.
The unit is registered as a device that does not cause or suffer from radio-frequency interference. It is CE approved and it
conforms with the Low Voltage Directory.
.
The safety and installation instructions must be observed.
.
There shall be no guarantee cover against damage resulting from any failure to observe these operating instructions and
no legal liability for any resultant consequential damage.
3. General functions
This kit includes an A/V sender and receiver. It transmits any audio video signal anywhere in the house, without any extra cable.
Cable transmission
Thanks to the cable turner integrated in the transmitter, you can watch one cable channel on your main TV, and another cable
channel on a second TV.
Multi-source
With this kit, you can also transmit an audio / video signal from any A/V source: Cable, SAT, DVD player, VCR, TV... to another
appliance such as TV, VCR... You can select and manage the source remotely by the supplied remote control
How does this work ?
The audio and video signals are transmitted at 2.4 GHz by the VT30CT Video Transmitter to the VR50E Video Receiver. The
maximum line-of-sight range is 100 metres. The signals of the 6in1 remote control (included) are transmitted by radio at 433 MHz
between the VR50E receiver and the VT30CT transmitter.
