Chapter 01
Before Using the Product
1-1. Safety Precautions
2019 ELECROW All Rights Reserved.
C
2
―
Take the following steps when cleaning.
• 1. Power off the product and computer.
• 2. Disconnect the power cord from the product.
— Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock
may result.
• 3. Wipe the monitor with a clean, soft and dry cloth.
• Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor
• Do not spray water or detergent directly on the product.
• 4. Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
• 5. Connect the power cord to the product when cleaning is finished.
• 6. Power on the product and computer.
1-1-1. Electricity and Safety.
1-1-2. Installation
1-1-3. Cleaning
• Do not use a damaged power cord or plug, or a loose power socket.
• Do not touch the power plug with wet hands.
• Insert the power plug all the way in so it is not loose.
• Do not install the product near heat sources.
• Do not set down the product on its front.
• Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.)