39
Copy the IP of Crowtail-ESP8266 Node MCU and open it with browser, you could see the web page
shown below. You can use the button on the web page to control the LED and buzzer:
What will you see
1. Click the menu “Setting”, choose the ‘Comm Port Settings”, and it’ll popup an interface “Serial
Advanced Setting”, you should set the port
(
The port of my board is 4, but yours may be different,
you can check the port of the board in the port of your computer
)
for Crowtail-ESP8266 Node MCU
and baud rate there. After correctly set, click the “Connect” option on the top of the menu.
2. Connect the wireless networks around you. We can click the “Survey” option to see all WIFI can
obtain around you. Then enter the WIFI name and password and click “Set AP” option. Finally, click
“Get IP” option to get the IP for Crowtail-ESP8266 Node MCU.
3. Click “Upload File...” option, open “P18_ESP8266_Web_Server" folder, then choose “init.lua” and
“webserver.lua” in the “Program” folder for uploading.
Summary of Contents for Crowtail Deluxe Kit
Page 47: ......
