Elecom UCAM-S1C30 UCAM-S1C30 Series, Setup Manual

Page: 6 / 16

6 7
5.
Click on the button.
Installation will begin.
6.
Click on the button.
7.
Peel off the sticker from the USB connec-
tor of the PC camera.
8.
Plug the USB connector of the PC cam-
era into a USB port of the PC.
Though this PC camera consumes a
maximum 100 mA of power, because
of specifications, connect it to a USB
port that supplies 500 mA.
The PC camera will be recognized automati-
cally.
The PC camera may be connected
and disconnected while power to the
PC is ON.
Do not try plugging the USB connector
in upside-down.
This completes Driver Utility installation.
Next, check that the Driver Utility was correctly
installed. Go to pg. 8.
Installing in Windows 98/98SE
1.
Load the Install Disk into the CD-ROM
drive.
2.
Click on
" ファイル名を指定して実行 …"
in the Start menu and, when the 「ファイル
名を指定して実行」
window appears, type
"D:¥setup.exe" into the text box and click
on the
button.
"D" is the CD-ROM drive of your PC.
Normally, it is the D drive.
3.
Click on the button.
4.
Select
"
Complete
"
and then click on the
button.