Elecom UCAM-N1D30 Series, Setup Manual

Page: 5 / 16

4 5
Check the version here.
This example shows Service Pack 4.
Installing the Driver Utility
This section explains how to install the Driver Util-
ity and connect the webcam to your PC. The Driv-
er Utility must be installed before the webcam is
connected to a PC.
•
DirectX 9.0 or a later version is required
to operate this webcam. If a supporting
version is not installed in your PC,
install one using Windows Update or
other means. If Driver Utility installation
is imparted before DirectX has been
installed, the DirectX 9.0b installation
program will be executed first. In such
case, updating the software with Windows
Update installs the latest version (as of
January 2005), DirectX 9.0c.
• Install the Driver Utility before connecting
the webcam to your PC.
If you get this
backwards by mistake, cancel installation
of the displayed USB device, disconnect the
webcam and install the Driver Utility.
Installing the Driver Utility in Windows XP
1.
Load the included CD-ROM into the CD-
ROM drive of your PC.
2.
Select
「マイコンピュータ」
from the Start
menu.
3.
Double-click on the CD-ROM drive where
you loaded the CD-ROM in Step 1.
Information on the CD-ROM appears in the
window.
4.
Double-click on Setup (Setup.exe).
5.
Click on the
button.
Installation begins.