How to view the display
Various settings
Button functions
Specifications
(Buttons on the reverse side)
Explanation of sounds and lamps
Thermo-Hygrometer User's Manual
OND-01 Series
Open the battery compartment on the back of the unit and take out the battery protection
sheet stored in the compartment (refer to the diagram for part names).
How to set the clock
1. With the date and time displayed on the screen, press and hold the SET button (hold for approx. 5
seconds). The [24h] or [12h] indication begins blinking, and you can now perform settings.
2. Settings are done in the following order: 12h/24h
→
Year
→
Month
→
Day
→
Hour
→
Minute
* Adjust the numerical values by pressing the UP (
) and DOWN (
) buttons, and then press the SET
button to confirm the value, and move on to the next setting. Press and hold the UP and DOWN
buttons to rapidly cycle through values.
How to set the alarm clock
1. Press the SET button until the screen displays [ ]. Press the UP/DOWN buttons to display the [Alarm
clock icon
]. When is displaying, the alarm clock is set to ring.
2. Press and hold the SET button (hold for approx. 5 seconds). "Time" starts blinking, and you can now
set the alarm time.
3. The alarm time is set in the following order: Hour
→
Minute
* Adjust the numerical values by pressing the UP (
) and DOWN (
) buttons, and then press the SET
button to confirm the value, and move on to the next setting.
When setting is complete, remove the lock at the bottom on the reverse side of the unit,
and pull out the stand to use it in a standing position.
SET button
1.Switches between "Time" and "Alarm settings"
* After approx. 30 seconds, the alarm setting screen will automatically return to
the "Time" display.
2. Turn off the alarm clock
SOUND button
- Switches between sound ON and OFF
* When sound is ON, a speaker icon ( ) appears next to the time
display. When this icon is displaying, the alarm will ring when the
status condition rises above "Caution".
LED button
- Switches between LED ON and OFF
* When LED is ON, a light bulb icon ( ) appears next to the time
display. When this icon is displaying, the LED lamp will blink when
the status condition rises above "Caution".
Icon display
* Flashes during display
A suggested daily activity
with which you should
aim to take caution
Cautionary items
Heatstroke
Warning
Risk for all daily
activities
For senior citizens, even when
resting/asleep there is a high
risk of danger. Avoid going
outside as much as necessary,
and move to a cool room.
Caution
When going outside, avoid
spending time in direct heat.
When inside, take caution that
the temperature is not too high.
Icon display
* Flashes during display
Cautionary items
Influenza
Warning
Air is particularly dry, creating a
condition where influenza can
easily propagate.
Caution
Air has become drier, creating a
condition where influenza can
propagate.
(Reference) Heatstroke cautionary items: From "Guidelines to prevent heat disorder in daily life" published by The Japanese Society of Biometeorology. Influenza cautionary items: From The Miyagi
Prefectural Medical Information Center
Sounds
Warning
6 times / 10 second intervals
Caution
2 times / 10 second intervals
Lamps
Heatstroke - Red
Influenza - Blue
Warning
Blinks 2 times per 1 second /
5 second intervals
Caution
Blinks once per second /
15 second intervals
廢電池請回收
Clock
Displays month, day, day of the week, hour
(12h/24h configurable display)
Alarm clock
Alarm with increasing tempo
Power supply
3.0 VDC (2 x AAA dry cell alkaline batteries)
Size / Weight
W80 x H80 x D19.5 mm (excl. stand) / 55 g
Accessories
2 x AAA dry cell alkaline batteries for confirming unit operation
Measurement range
Temperature: 0°C - 50°C / Humidity: 20% - 90%
Note: [ ] displays when the maximum measurement limit is exceeded,
[ ]displays when the minimum measurement limit is exceeded.
Usable temperature/
humidity range
Temperature: 0°C - 50°C / Humidity: 20% - 95% (no condensation)
Resolution
Temperature: 0.1°C / Humidity: 1%Rh
Measurement interval Temperature/Humidity: 30 seconds
Sensor
Temperature: Thermistor / Humidity: Polymer resistance
Accuracy
Temperature: ±1.5°C / Humidity: ±5%Rh *1
Accuracy conditions
Temperature: 0°C - 50°C ±1.5°C
*1 Humidity: 35%-75%: ±5%, other conditions: ±10%
Materials
Unit: ABS plastic / Front panel: PC
ELECOM CO., LTD.
1-1 Fushimi-machi 4-Chome Chuoku, Osaka Japan 541-8765
URL: http://www.elecom.co.jp/global/
宜麗客（上海）貿易有限公司
上海市徐匯区肇嘉浜路１０６５甲号飛雕国際大厦７０４号
電話 ： ８６－２１－３３６８００１１
ＦＡＸ ： ８６－２１－６４２７１７０６
ＵＲＬ ： ｈｔｔｐ：／／ｗｗｗ．ｅｌｅｃｏｍ－ｃｈｉｎａ．ｃｏｍ／
ELECOM Korea Co., Ltd.
5F Suam Bldg. 1358-17, Seocho2-dong, Seocho-gu, Seoul 137-862, Korea
TEL : 1588-9514
FAX : (02)3472-5533
URL : www.elecom.co.kr
ELECOM Singapore Pte. Ltd
33 UBI AVENUE 3 # 03-56. VERTEX SINGAPORE (408868)
TEL : (65)-6347-7747
FAX : (65)-6753-1791
ELECOM India Pvt. Ltd.
408-Deepali Building, 92- Nehru Place, New Delhi-110 019, India
TEL : 011-40574543
e-mail: [email protected]
URL: http://www.elecom-india.com/
