outwards by following the operation of Step 1). Check and make sure that
the handle shall be positioned well at the holes of housing.
4) Grasp the center of handle and lift it upwards (see Fig.3), check and
make sure that there shall be no abnormal condition can be found.
5
2
1
3. Please ensure the ice maker is level and on a stable table or platform to
avoid malfunction.
4. The incline angle of the ice maker cabinet should not exceed 45°during
transportation or use. Do not turn the ice maker upside down. Doing so
could cause the compressor or refrigerating system to operate incorrectly.
Please allow time for the fluids in the compressor to settle after the ice
maker is moved or transported. Before using the ice maker for the first
time, please wait for 2 hours after the unit has been leveled and positioned
in the proper place.
5. The appliance must be placed on a dry and level surface with sufficient
ventilation, far from heat sources such as ovens, heaters and corrosive
gases. Leave about a 6-inch (15cm) clearance on all sides of the ice maker
for proper ventilation.
6. Do not fill the water reservoir with hot water. This may damage the ice
maker. It is best to fill the water reservoir with water of room temperature
or lower.
7. Do not use the appliance in a very cold environment (lower than 5
℃
(41
℉
))
.
8. Clean the appliance by following the operation of “CLEANING AND
MAINTENANCE” before operate.
USING YOUR ICE MAKER
3
