Elechomes CY601, User Manual

Page: 8 / 9

Ÿ Elechomes electric pressure cooker is designed with memory function to
enable much more convenient use.
Ÿ
Memory function refers to the memory of last working state that is valid
within 2-3 hours when restarted after sudden shutdown in working, timing,
and keeping warm state.
Memory Function
Please refer to the table below if the device malfunctions. If the problem
persists, please contact Elechomes.
Troubleshooting
Problem Possible Reason Solution
The cover is
difficult to
close.
1
Seal ring not installed
properly Ÿ Position the seal ring well
The float valve is clogged
by the lever.
Ÿ
Push the lever lightly to
readjust
2
The float valve hasn't
dropped down (even the
steam is fully released). Ÿ Press the float valve down
lightly with a slender stick The cover is
difficult to
open.
3
The seal ring is not
attached to the cover. Ÿ Install the seal ring Steam is
escaping
from the
cover.
The seal ring is damaged. Ÿ Replace the seal ring
Food debris is attached
to the seal ring. Ÿ
Clean the seal ring
The cover is not closed
properly. Ÿ Open, realign, and close
the cover again
Problem Possible Reason Solution
Steam is
escaping from
the float valve.
4
Food debris is attached
to the seal ring of float
valve.
Ÿ
Clean the seal ring of
float valve
The seal ring for the float
valve is damaged.
Ÿ Replace the seal ring of
float valve
5
The float valve
doesn't rise.
The exhaust valve is not
positioned at the sealing
position.
Ÿ
Re-position the
exhaust valve
There is not enough food
and/or water in the inner
pot.
Ÿ
Add more ingredients
and/or water according
to the recipe's ratio.
The cover or exhaust
valve is leaking. Ÿ Take the device to an
approved maintenance
center to be repaired
6
The LED screen
displays “E01”
and the cooker
beeps 10 times.
The sensor circuit is
open. Ÿ
Take the device to an
approved maintenance
center to be repaired
The LED screen
displays “E02”
and the cooker
beeps 10 times.
7
The sensor is short
circuiting. Ÿ Take the device to an
approved maintenance
center to be repaired
8
The LED screen
displays “E03”
and the cooker
beeps 10 times.
The cooker is
overheating. Ÿ Make sure the inner pot
is properly installed.
Ÿ Make sure there is
enough food and/or
water in the inner pot.
Ÿ Unplug the cooker and
wait for it to cool
completely.
9
The LED screen
displays “E04”
and the cooker
beeps
intermittently. The pressure switch is
malfunctioning. Ÿ Take the device to an
approved maintenance
center to be repaired
12 13